00116442-01 Waffle-Pack Changer for SIPLACE F5 HM combined with
fixed component table for transport height 900mm. Version for
230/110V. Storage capacity of 28 WTC (Waffle Pack Tray Charrier),
max. size of Waffle Pack Tray 240mm x 340mm x 13mm. Tray changeover
time 2.5s.. 10 feeder locations required for Waffle-Pack Changer,
related to righthand side of transport direction. Offset-WTC enable
the 6-Segment Collect and Place Head to pick up all components from
Waffle Pack Tray Carrier.
00116443-01 Waffle-Pack Changer for SIPLACE F5 HM combined with
fixed component table for transport height 930mm. Version for
230/110V. Storage capacity of 28 WTC (Waffle Pack Tray Charrier),
max. size of Waffle Pack Tray 240mm x 340mm x 13mm. Tray changeover
time 2.5s.. 10 feeder locations required for Waffle Pack Changer,
related to righthand side of transport direction. Offset-WTC enable
the 6-Segment Collect and Place Head to pick up all components from
Waffle Pack Tray Carrier.
00116444-01 Waffle-Pack Changer for SIPLACE F5 HM combined with
fixed component table for transport height 950mm. Version for
230/110V. Storage capacity of 28 WTC (Waffle Pack Tray Charrier),
max. size of Waffle Pack Tray 240mm x 340mm x 13mm. Tray changeover
time 2.5s.. 10 feeder locations required for Waffle-Pack Changer,
related to righthand side of transport direction. Offset-WTC enable
the 6-Segment Collect and Place Head to pick up all components from
Waffle Pack Tray Carrier.
00116701-01 Upgrade License Component Barcode
00116702-01 Upgrade License (WdtL)
00116703-01 Upgrade License AutoProgDownl.PCBBarcode
00116704-01 Upgrade License Long Board Option
00116807-01 SMEMA Interface for single and dual conveyor SIPLACE
S/F.
00116816-02 Moveable magazine of size II PS/PC with secure lock.
Witdh adjustment from 50 to 259mm. The maximum PCB length is 399mm
and the magazines has a storage capacity of up to 50 pieces with a
10mm spacing. Magazine dimensions are 320 x 400 x 567mm (w x l x
h). Material is Polystyrol (magazine plate) and Polycarbonat (side
parts), till 55 degree celsius, time in oven max. 15 min. PCB
temperature up to 80 degrees celsius.
00116908-01 Upgrade Setup Center Package (V3.0)
00116933S03 ESS Docking Unit for COTF-X (HW)
00116935-01 SIPLACE Splice Detection Hub for Table Controller: This
item is needed to prepare a SIPLACE station for splice detection.
It contains a hub for connection of up to 2 table controllers for
SIPLACE S/F. Also, cabling and mounting material is included.
Additionally, the respective table controller(s) and splice sensors
need to be ordered.
00116936-01 SIPLACE Splice Detection Hub for Table Controller: This
item is needed to prepare a SIPLACE station for splice detection.
It contains a hub for connection of up to 4 table controllers for
SIPLACE HS-xx. Also, cabling and mounting material is included.
Additionally, the respective table controller(s) and splice sensors
need to be ordered.
00116961-01 Protection Shield for SIPLACE Placement Stations 1
feeder location.
00116962-01 Protection Shield for SIPLACE Placement stations 6-10
feeder locations.
00116963-01 Protection Shield SIPLACE Placement stations 11-20
feeder locations.
00117010S03 Dip module f. fluxes and adhesive
00117120-01 Measurement device for inspection of the coplanarity on
the leads of IC. For use with Pick and Place Head for SIPLACE F5HM.
00117130-06 DCA-Camera SIPLACE includes the following materials:
one DCA vision module including cover, (Exchange between standard
Collect and Place Head vision module). The DCA vision module covers
a component range from 0.5mm x 0.5mm up to 13mm x 13mm. The maximum
field of view is 15.7mm x 15.7mm. The minimum bump diameter is
110µm (4 mil),the minimum pitch 200µm (8 mil).
00117185-01 Retrofitting kit to 110/208V operating voltage for
SIPLACE S/F. Delivery as a part of station free of charge.
Attention: If retrofitted at a costumer a voltage savety check (DIN
EN 60204)is necessary. For assistance please ask SIPLACE SMT
Service.